Printers are the heart and soul of our homes and offices. Still, the majority of its users are vexed by error codes. Such error codes are perplexing and halt you from work; however, you begin to look for a solution to get back the printer in its right working state. In this blog post, we’ll run through the most common printer error codes along with their descriptions and what you should do about them. It’s bound to be helpful if you actually do have an error code but have no idea what to do with it.
Printer Error Codes: Most numbers or alphanumeric messages appearing on your printer’s screen or even your computer indicate that it failed in a given specific situation. Connectivity failure or to certain hardware part failures of your printer are some indications of this problem. Determination of the error code relevant to your particular printer is required in troubleshooting.
Discuss the most common printer error codes and their meaning with troubleshooting procedures for each:
Most Common Printer Error Codes and Meaning:
Error Code 50.4 Power Supply Error
What it means: This error message is mostly observed when a flaw is found with the power supply to the printer or a power surge.
How to troubleshoot
Power off the printer and then remove the power plug from the main power source.
Wait for some time, and then reconnect it to the power source and turn it on.
If it does not work, then check on the power cables and the power outlet too
Error Code 0x00000709 (Printer Connection Issue)
It displays your printer is not connected to your computer.
How to Solve:
Check whether it is connected to the computer via a USB or wireless connection.
Also, check whether the default printer is proper in the system settings.
If it is a wireless printer, then check the network link and renew your printer’s wireless settings.
Error Code 5B00 (Waste Ink Pad Full)
This error occurs when the waste ink pad of a printer reaches its capacity.
How to correct
The pad needs to be cleaned or changed. Where to find this pad and how to replace it is indicated by the manual.
If the task is not guaranteed to be done correctly, then it may demand a technical professional
Cartridge Error 5200
Error: The printer did not accept an ink cartridge that is available within the ink cartridge holder inside it
Solution:
Cartridge removal to clean its contact surfaces using soft cloth
Install the cartridge and have it fit perfectly
Try replacing an ink cartridge if problems persist
Error Code 79: Printer Firmware Error
Error codes show the faults in the firmware. This leads to failure in the working of the printer and does not work well:
How to Fix:
The printer will be turned off and also disconnected for at least 30 seconds.
The printer will then be connected back and turned on.
If it still fails to work, you will have to update or reprogram the firmware of your printer.
Error Code 6000 Paper Jam
There is a paper jam in some part of the printer
How to Cure:
You need to open the paper tray of your printer and pull out any jammed paper from it.
Check inside your printer for some little bits of paper
Load the papers correctly so there will be no problem
Error 1103: Out of Paper
This error code is when your printer’s paper has run out or perhaps the paper in its paper tray is insufficient.
How to Fix:
Check first if the paper tray is full, not empty.
Test the paper feeding mechanism to see if it has some interference.
Put in again the paper tray and reboot the printer.
How to Reset Printer Error Codes
That sometimes it just is, depending on the device, where sometimes the trick involves resetting the printer’s error code. Here are general guidelines regarding how to reset your printer error codes:
Turn off the printer and unplug it from any source of power.
Wait for around 5-10 minutes so that the inside system will self-reset.
Connect your printer to any source of power and turn it on.
If the above still does not clear the error code, refer to the user guide of your printer for further instructions on how to soft or hard reset the printer. Soft resets can mostly be carried out by going through the menu settings of your printer, while hard resets, in some instances, would require a specific sequence of buttons on the printer.
Other Solutions: Error Code Fixing of Your Printer
Update the printer drivers: Outdated drivers of printers might trigger some error codes in some instances. One may visit the website of your printer’s manufacturer to see whether there are updated drivers
Printer Queue: At times, error codes occur because of a print stuck on your print queue. Open your computer’s control panel, or alternatively through your printer setting, delete any items that appear on the queue and print once more.
Contact Customer Support: If there are still error codes displayed and will not delete; it is now time to ask customer support for further fixing.
Conclusion
And knowing the printer error codes is one very important thing as it saves you some hassle. You get to know how to fix certain problems in your printer or how to deal with certain kinds of errors that may occur. That way, you end up saving some undeserved downtime at your hands, running your printer all the time. For additional troubleshooting information, see the quick reference guide provided with your printer or visit specialty sites that deal exclusively with printer problems.
If you have some kind of printer ailment that hasn’t fully recovered on its own, or you’re just having some kind of problem with your printer, here are a few more fixes for you: PrinterNotWorking.