Error codes on your printer can be really frustrating, especially when they mess up your workflow. Among the common errors Brother printer users encounter is the error code E50 Brother Printer. It occurs because of faulty mechanical parts of the machine, either the scanner or the print head. Thankfully, in most cases, such an error will tend to resolve rather quickly if correct steps of troubleshooting have been undertaken. In this blog post, we shall be detailing probable causes of the Brother Printer Error Code E50 along with step-by-step instructions detailing how to troubleshoot it.
What Is Brother Printer Error Code E50?
Brother Printer Error Code E50 is actually a technical breakdown of some kind about the hardware components of your printer. Stickings of print head, mechanical breakdown inside your printing appliance and even problems concerning your scanner unit have been proven to cause such a code. Each time you would see a different error code on your LCD screen of the Brother printer while not letting you print.
If you ever face Brother Printer Error Code E50, you can take proper action before things go out of control. Fortunate for you, most of the Brother printer error codes like E50 can easily be debugged and sorted by yourself if properly done.
What Causes Brother Printer Error Code E50
To start fixing, these are some of the common causes for a Brother Printer Error Code E50:
1. Paper Jam in the Printer: Another common cause of this error E50 is due to the paper jam in the printer or when the paper jams inside it due to a print head jam.
2. Faulty Scanner Unit: Faulty scanner unit can also cause this error. Here, mechanical failure or a blockage is possible.
3. Faulty Cartridge or Drum Unit: It sometimes fails to print and gives error code E50, which is a result of a faulty cartridge or drum unit.
4. Installation Problem: The fault may also arise due to the improper installation of the components involved in the printer like ink cartridge or print head.
With the above causes, let’s begin diagnosing some step-by-step methods for the Brother Printer Error Code E50 as follows.
1. Power Off and Power On the Brother Printer
First step to fix the Brother Printer Error Code E50 is to turn off your printer, unplug it from a power outlet for at least 30 seconds and then plug it back. This should rest the printer system and hopefully resolve any temporary glitch that caused this glitch.
Wait, now attach the printer, power on and check to see if error still persists, then move ahead with further steps.
2. Paper Jam
A paper jam is also another cause that brings the Brother Printer Error Code E50. Paper that got stuck from a paper may bring this kind of error that can be one or two piece small. Locate the jam through:
– Open the front cover of the printer and pull out the ink cartridges.
– Look inside the printer to ensure there is no paper jammed in the paper path, print head, or scanner unit.
– Remove any paper found there without pulling on it. Do not tear the paper.
– Close the printer back up and test it by printing again.
3.Inspect the Ink Cartridges and Drum Unit
Incorrect installation or damaged ink cartridges and drum unit is also accountable for Brother Printer Error Code E50. The following steps are going to be followed to diagnose the error.
Open up the front cover of the printer, take out the ink cartridges, and the drum unit.
Check visible damage, dust, or dirt on the drum unit and the cartridges
Dust or Toner present must be cleaned completely with a soft cloth.
– Mount the drum unit and ink cartridges, then close the cover properly.
In case your cartridges or drum unit is faulty or damaged, change it with a new one.
4.Inspection of Mechanical Parts
At times, mechanical parts of your printer may lead to Brother Printer Error Code E50. Here’s how to inspect this:
Open top or side cover of printer to access scanner unit and print head
Ensure that the print head moves smoothly and is not restricted in any direction.
Open printer and view inside so that possibly the inside had debris inside to create a stop or mechanical breakdown.
– If nothing appears to be out of place, then move the print head manually gently in all directions to check if it is stiff or not straight.
5. Reset the Printer
In cases where the given instructions above still don’t restore your problem, the printer at times is returned to its previous factory default setup for it to be included among the list of solutions to the Brother Printer Error Code E50. To achieve this, one is advised as follows:
Switch off the printer
Disconnect the printer
Switch on the printer and at this moment press either the Go or Start button according to most printer models.
Press and hold the button for 10 to 15 seconds until the device gets reset. Release the button and try checking if the error message disappeared.
6. Contact Brother Support
If, after following all the above and the Brother Printer Error Code E50 still does not disappear, then it means that there must be something wrong with the hardware of the printer. From this stage onwards, it is best to get in touch with Brother’s customer support help for further advice.
Conclusion
Brother Printer Error Code E50, in most cases, is actually a mechanical defect or a wrongly set cartridge or print head. The above steps of diagnostics will be helpful for one to simply troubleshoot for such an error condition. First off, one needs to do the following simple steps: restart, check for jams, and see the conditions under which the cartridges were installed along with the drum unit. If it continues, reset it or call the Brother support team for more serious troubleshooting.
For more useful tips and solutions on how to troubleshoot Brother Printer Error Code E50 and other printer issues, check https://printernotworking.com/, your ultimate source for troubleshooting and maintaining your printer.